Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 1147 items
Ultra-wideband ultrasonic analysis, measurement, and evaluation of all materials is possible!
● Ultrasonic analysis, measurement, and evaluation of all materials are possible with ultra-wideband. ● Fully compatible with dual probes and single probes. ● Synthetic aperture, dynamic correlation filter, scattering analysis, peak enhancement, averaging processing.
The transmission and reception channels can be freely configured! A portable computer can be used for control.
The "Mix Series" is a remote-type multi-channel flaw detector that can connect up to 16 probes. With its ultra-compact and low power consumption design, it can operate on a 12V car battery, demonstrating its effectiveness in multi-channel field inspections. Control and waveform monitoring can be performed using a laptop computer. The configuration is divided into a remote unit (RMIX16) and a main unit (MMIX16), and the distance between them can be extended up to 500 meters. 【Features】 ■ Maximum extension of 500m ■ Multi-channel ■ Simultaneous transmission and reception ■ Ultra-compact and lightweight ■ Portable computer can be used for control *For more details, please refer to the PDF materials or feel free to contact us.
Strong against external electrical noise! High performance that cannot be achieved simply by combining a probe and a general-purpose pulse receiver.
We handle "Active Probes" at our company. To maximize the characteristics of each probe, we have incorporated suitable pulser receivers for each type of transducer, including polymer transducers, 0-3 and 1-3 composite transducers, and low-frequency wideband ceramic transducers. The high performance that cannot be achieved simply by combining a probe with a general-purpose pulser receiver is our selling point. 【Features】 - No waveform distortion due to cable or electrical matching inconsistencies at high frequencies - Increased resistance to external electrical noise - Optimal electrical matching, which can reduce unwanted vibrations in the radial direction, for example - For low-frequency applications with relatively high electrical impedance of transducers, a wider bandwidth is achieved - No need for adjustments on the equipment side, such as damping or pulse energy, allowing tests to be conducted under the same conditions every time *For more details, please refer to the PDF materials or feel free to contact us.
Bend and thin! Use a strip line instead of coaxial wiring near the probe.
Our company manufactures sheet-type transducers utilizing the characteristics of 0-3 composite vibrators, which are thin and flexible. In the vicinity of the transducer, we use a strip line made from a flexible substrate instead of coaxial wiring. Since the acoustic impedance is neither as high as that of ceramic vibrators nor as low as that of polymer types, we can use backing materials with a very high attenuation rate that are both diffusive and thermally converting. 【Features】 - In the vicinity of the transducer, we use a strip line made from a flexible substrate instead of coaxial wiring. - The total thickness, including the backing, is 1.2mm at 5MHz and 0.8mm at 10MHz. - Due to the thinness of the material, thinner transducers can be manufactured. - It is possible to use backing materials with a very high attenuation rate that are both diffusive and thermally converting. *For more details, please refer to the PDF document or feel free to contact us.
8 AA batteries + 8 D batteries, measuring every 10 minutes, data transmission every 12 hours, operates for 10 months!
The "AD16ch + DI2ch Multi-Point Web Observation System" is a system that allows you to connect and verify the operation of the equipment in the office before going on-site, and once the sensors are connected on-site, it can be used via the web. All you need is the sensors. It includes a measurement system equipped with a solar cell, NiMH rechargeable battery, and FOMA modem with AD16ch and DI2ch. It can be placed anywhere that has FOMA mobile service, with a waterproof case and an operating temperature range of -20 to 60°C. The sensors are powered internally during measurement, eliminating the need for an external sensor power supply. 【Features】 ■ Integration of functions necessary for outdoor measurement ■ Low power consumption running on dry batteries ■ Maintenance of accurate time ■ High-precision AD included *For more details, please download the PDF or feel free to contact us.
Web observation system for measuring the axial force of rock bolts that monitor expansion and contraction underground!
The "Battery-Powered 4ch Strain Gauge Web Measurement" can be directly connected to a rock bolt axial force gauge on-site, allowing immediate start of web observation. It operates on built-in batteries for one year with ultra-low power consumption, making it a hassle-free observation system. The signals from four rock bolt axial force gauges installed on-site are connected to the observation system. The observation system supplies 5V to the bridge only during measurement, directly measuring the output voltage with high-precision AD in μV. The measurement results are compiled and regularly sent to the server via email. 【Features】 - Compact size: 29.5cm height x 15.5cm width x 12.5cm thickness, fits in hand - Lightweight at 1.75kg, including eight built-in batteries - All components including batteries, measurement, and FOMA modem are housed together, completing web observation with just this unit - Stored in an IP65 waterproof case and easily mounted with construction pipe mounting brackets - Operates for one year with eight AA batteries, measuring every 10 minutes and updating the web every 6 hours *For more details, please download the PDF or feel free to contact us.
A must-see for the civil engineering and construction industry! Preliminary geological surveys can be conducted at low cost before drilling.
This product is a measuring instrument that allows for rapid and accurate measurement of ground resistivity (electrical exploration method). Voltage, current, and resistance measurement values are displayed on a clearly visible digital display, and it comes in a convenient handheld case. It accurately measures the resistance between two electrodes using a four-terminal resistance measurement method. 【Features】 - Rapid and accurate measurement of ground resistivity (electrical exploration method) - Preliminary geological surveys can be conducted before drilling begins - Easy operation for measurement (switching voltage/resistance measurement ranges) - Voltage output ranges (600V/300V/150V), resistance measurement ranges (1kΩ/400Ω/4Ω) - Convenient handheld case (approximately 8.5kg) *For more details, please refer to the PDF document or feel free to contact us.
Self-checkout compatible automatic change dispenser. Non-linked to the register.
For more details, please refer to the product introduction page or feel free to contact us.
Load forest map information and calculate the current position using a position detection sensor!
We would like to introduce the "OWL-AR Navigation System" that we handle. Based on the forest map information (forest resource data) obtained from OWL, we create management plans. Even in forests where GPS accuracy is low or GPS signals cannot be received, we use AR (augmented reality) technology to quickly navigate to the target trees based on the spatial relationships of standing trees. This is a system that displays various information on smart glasses. 【Features】 ■ Acquisition and updating of current location ■ AR display of standing tree information ■ Route search and AR navigation *For more details, please download the PDF or feel free to contact us.
Reliable," "Easy," "Safe
e-Purcell's electronic delivery service is a service that reliably transfers large data such as CAD data with simple operations. Thanks to patented technology, it prevents communication errors and timeouts that are commonly seen in general transfer services using the internet when transferring large data, ensuring that data is delivered to the recipient's client with a single operation. Moreover, it allows not only manual operations but also automatic sending from business applications, automatic sorting of received data, and importing into business applications. This service is ideal for customers struggling with handling large data, such as those who are "sending CAD data overseas using media like CDs, but are troubled by the hassle and time involved," or those who are "operating an FTP server for data exchange with business partners but want to be freed from the tedious operational tasks like ID management and data backup/deletion." It is used by approximately 7,000 customers, including major automobile manufacturers and large construction machinery manufacturers.
This is a group of inverter units equipped with essential functions as well as protection circuits. It reduces the effort required for hardware construction, debugging, and evaluation testing.
The PE-Inverter series inverter unit is designed for research, development, experimentation, and embedded use. It is a unit that combines the power circuits necessary for power conversion inverters, various sensors, and protection circuits. You can use three optimal types of units in the most suitable configuration. It is recommended for researchers and developers involved in motor control and power conversion control using inverters, as well as testers evaluating and testing motors and power conversion devices through inverter control. By connecting it to our digital control system for power electronics, PE-Expert, you can easily build an inverter control system. For more details, please download the catalog or contact us.
We provide a one-stop solution for hardware and software.
We will assist you in resolving your requests, concerns, and challenges related to hard air development. We will provide proposals for a one-stop solution aimed at realizing prototype development, mass production, enclosures, and embedded software.
High-resolution image distribution server! Compatible with ONVIF, allowing for flexible system construction according to various applications!
The "mmEye-HD" is a high-quality, low-latency IP image transmission device compatible with HD-SDI/NTSC cameras. It offers selectable image compression methods of H.264 and JPEG, and can simultaneously stream two types of streams. Additionally, we also offer the "mmEye-HD2," which supports ONVIF Profile S, T, and AI image detection functions. 【mmEye-HD Features】 ■ Supports Full-HD (1920×1080) to 320×240 ■ Wide bitrate range from 32kbps to 20Mbps ■ Compatible with ISDN lines and satellite phones ■ Remote control of cameras and pan-tilt heads via serial throughput function ■ Two-way audio (supports low-bandwidth to high-quality audio through AAC/Speex) ■ Low power consumption: approximately 5W, operates with natural air cooling (fanless) and no moving parts *For more details, please refer to the PDF document or feel free to contact us.
Equipped with NVIDIA Jetson Nano! Using a waterproof camera with dedicated IR lighting improves recognition accuracy!
The "mmEye-VA4-LPR" is a vehicle number recognition device that automatically reads license plates of vehicles captured by HD-SDI cameras. It covers a wide shooting range in Full HD. Using a dedicated waterproof camera with IR lighting improves recognition accuracy through automatic exposure control. Since the device can detect and recognize vehicles independently, it allows for the construction of a simple and scalable system. 【Features】 ■ Automatically detects and recognizes license plates from images ■ Covers a wide shooting range in Full HD ■ Using a dedicated waterproof camera with IR lighting improves recognition accuracy through automatic exposure control ■ In addition to notifying recognition results over the network, it can also save to USB memory and control contacts *For more details, please refer to the PDF document or feel free to contact us.
![[Development Case] Development of an Edge AI Camera System Using Thermal/Visible Cameras](https://image.www.ipros.com/public/product/image/0a1/2000712806/IPROS02234356205134502215.png?w=280&h=280)
The target market includes maintenance of steel and other plant equipment, as well as infrastructure inspections! We will introduce examples that have enhanced added value!
We would like to introduce a case study developed in collaboration with Japan Avionics Corporation. The development targets smart maintenance in industries such as oil and chemicals, as well as infrastructure DX in construction and civil engineering, and equipment maintenance in manufacturing plants. We conducted product development aimed at enhancing the added value of thermal and visible camera modules to meet customer needs. 【Case Overview】 ■ Joint development with Japan Avionics Corporation ■ Purpose - To enhance the added value of thermal and visible camera modules and develop products that meet customer needs ■ Target Markets - Smart Maintenance: Maintenance of plant equipment in oil, chemicals, power, gas, steel, etc. - Infrastructure DX: Construction, civil engineering, transportation, infrastructure inspection - Factory Equipment Maintenance: Equipment maintenance in manufacturing plants *For more details, please refer to the PDF document or feel free to contact us.
